Log Dyno Horsepower CSV Dyno1.08.09 - Google Play
You'll be able to see results in few seconds.
Publisher Description
Log Dyno Horsepower CSV Dyno -Measure Torque & Horsepower from your datalog (CSV files) with this dyno app
Measuring your car's torque and horsepower has never been easier, now that you can do it with the help of your mobile device and this digital Dyno. You just need to open one of your datalog of a pull, and Log Dyno will do the rest.
You can use any CSV or MSL OBD datalog file that contains RPM data which is needed to measure Horsepower and Torque. You can also use SPEED data from GPS performance measurement devices such as VBOX and RaceBox and RaceBox mini.
From the torque curve, the app is also able to determine the optimal gear shift points to ensure maximum acceleration. This makes sure you know when to shift, so you always have the most possible power at the wheels.
Compare multiple measurements!
You can save each one of your Dyno measurements, and compare them, or just analyze them interactively.
What datalog files can be used?
● JB4
● MHD
● ProTool
● COBB
● ProTool
● Bootmod3
● and any other CSV datalog with RPM data or GPS Speed
This is the easiest way to have your torque and horsepower measured with a virtual dyno using only your mobile phone and your datalog. You can see if your mods or tune work right away, and compare them.
★Log Dyno has been compared to multiple real life dyno sheets, and measurements were spot on, with multiple different vehicles★
How does it work?
#1. Datalog your vehicle
Take the datalog just like a dyno pull, in one given gear, from low rpm to high rpm. Try to avoid wheelspin as it can cause spikes in the graph.
#2. Set up your vehicle data
The dyno app requires some data about your vehicle. You’ll be asked to set values for the following:
● Car Name
● Weight
● Tank Capacity
● Tire Size
● DT%
● Drag Coefficient
● Frontal Area
#3. Share the results!
You can share your results right from the virtual dyno measurement page to basically any app or post it to any social network or email it. Of course, you can just save the results in your phone gallery too.
For more detailed information, scroll down to the bottom of the description and see the User's Guide.
How accurate is the dyno measurement?
If you have set your vehicle data correctly, the results our dyno app gives will be the same as the results a real dyno will give you. Also, keep in mind that wheelspin may result in spikes in the graph. If you are unable to avoid it, you’ll still get accurate results, you just need to ignore the spikes.
The best thing about our dyno app is that you can see right away how your mods work after datalogging. Now, you don't have to go to the dyno if you want to measure any small modification or just never had your car's power measured. You can see right away how your mods or tune work after datalogging. You can dyno unlimited times and unlimited vehicles for the fraction of the price of a dyno measurement.
You have to set your car up, how much it weighs, its tire size, the gear ratios, and also what your car drag coefficient and frontal area are, which the app will help in determining.
Based on your car data and environmental values, the app calculates a torque and horsepower curve from the datalog, which you can analyze. The app also points out the peak values, and you will be able to see at what rpm you made the most torque and the most power.
Corrections:
● Uncorrected
● SAE J1349
● STD
● DIN 70020
● ISO 1585
Power Units:
● WHP
● BHP
● PS
● KW
Torque Units:
● LB-FT
● NM
At the wheels or at the crank
The app is widely used among N54 N55 and S55 Tuners with great results backed up by dyno runs.
You can datalog either via OBD or your piggyback tuner, all you need is a CSV file. You can also use a GPS device to datalog SPEED for measurement.
Facebook Group for Support/Questions and to share your results: Log Dyno Facebook Group
User's Guide
About Log Dyno Horsepower CSV Dyno
The company that develops Log Dyno Horsepower CSV Dyno is Profi-Soft Games. The latest version released by its developer is 1.08.09.
To install Log Dyno Horsepower CSV Dyno on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-09-02 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Log Dyno Horsepower CSV Dyno as malware if the download link to com.ProfiSoft.LogDyno is broken.
How to install Log Dyno Horsepower CSV Dyno on your Android device:
- Click on the Continue To App button on our website. This will redirect you to Google Play.
- Once the Log Dyno Horsepower CSV Dyno is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
- A pop-up window with the permissions required by Log Dyno Horsepower CSV Dyno will be shown. Click on Accept to continue the process.
- Log Dyno Horsepower CSV Dyno will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.
Program Details
System requirements
Download information
Pricing
Version History
version 1.08.09
posted on 2026-09-02
-General fixes
version 1.08.08
posted on 2024-11-06
-General Update
version 1.08.07
posted on 2023-08-21
-Android API 31 support
version 1.08.06
posted on 2022-05-13
-Bug Fixes
version 1.08.02
posted on 2020-10-31
-Fixes for various CSV formats
version 1.08.01
posted on 2020-10-29
Small fixes
version 1.08.00
posted on 2020-04-06
-Now VBOX and other gps device logs can be used, so now the app can calculate HP/TQ from speed too, previously the app only worked with RPM data, now it works with speed data. Make sure to only include a single gear pull part of your GPS log.
Process with a log from an ECU is unchanged.
-Tap on the CSV file even as an email attachment or from anywhere and the file will be directed to Log Dyno. Now works on every Android version.
version 1.07.11
posted on 2020-02-26
-Android 10 file access fixes
-Auto Weather fixes
version 1.07.09
posted on 2020-02-04
-Changed Auto Weather frequency from 60 sec to 5 sec
-Added to option to selec fuel type (Gas/Diesel) this influences the weight of the fuel in the tank minimally, since Gas and Diesel fuels don't weight the same.
version 1.07.08
posted on 2020-01-10
-If you are logging with Torque and it contains GPS Time then it won’t cause issues anymore
-Measurement start RPM modification is added in settings, default is 2000 RPM
Disclaimer
Official Google Play Link
We do not host Log Dyno Horsepower CSV Dyno on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Google and passed their terms and conditions to be listed there. We recommend caution when installing it.
The Google Play link for Log Dyno Horsepower CSV Dyno is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.



